TNG Installation Instructions

Single-page installation guide (show everything at once) | Hide all

TNG Support: darrin@lythgoes.net
TNG Forum: http://tng.community
TNG Wiki: http://tng.lythgoes.net/wiki
TNG info: http://www.tngsitebuilding.com
PHP info: http://www.php.net
MySQL info: http://www.mysql.com

Product Updates:
tngusers-subscribe@lythgoes.net
User Discussion:
tngusers2-subscribe@lythgoes.net

Discussion List Options
Discussion List Archives

Welcome to the TNG installation guide!

IMPORTANT: This is the FULL INSTALLATION guide. If you are upgrading an existing installation, please exit this page immediately and refer instead to the readme file that came with your upgrade!

Start

Choose your installation path:

Express Installation (Recommended)
Move quickly, with all the steps on a single page. You could even follow along with this video: https://vimeo.com/39681100

Regular Installation
If you'd rather move carefully and have everything explained in detail, along with troubleshooting tips if things go wrong

Don't worry, if you regret your choice, you can switch over at any time.

Regular Installation

Files

Step 1: Extract Files

If you downloaded TNG from the Internet:
The file you downloaded is a zip file, which means it actually contains quite a few files all "zipped up" together. Please find this file and unzip or extract the included files to a new folder or directory (name doesn't matter) on the hard drive of your local computer. Your operating system may be able to handle this operation, but if not, there are several specialized utilities can find on the Internet to do this job for you. A few you might look at are WinZip or PKZip for Windows, or ZipIt or StuffIt for Mac.

Some files should extract into subfolders (for example, "css", "img", "js", "languages", and various media-related folders, among others). If you don't see any subfolders after performing the extraction, please delete the files you extracted and perform the extraction process again with different options.

If you obtained TNG on a CD:
All the files you need are already extracted in the proper folders on the CD. You can copy everything to a new folder on the hard drive of your local computer if you wish, but it isn't necessary.
Next >>
Files

Step 2: Connect to Your Remote Web Site

Connect to the remote web site where you plan to install TNG. This could be done using a control panel file manager shown to you by your hosting provider, or using an FTP program (FTP stands for "File Transfer Protocol"). If you use the FTP method, you will need to know your FTP host name, username and password.

Once you get to your site, navigate to the folder where your site's home page resides. From here on, we will refer to this folder as the root folder (even though it probably isn't called that). If you're setting up a new site, the folder might be called "www", and your home page will likely be called "index.html", "index.htm" or "default.htm.
<< Prev Next >>
Files

Step 3: Setting up Your Remote Environment

Now that you've found your root folder, you need to decide whether you want your web address to point directly to your TNG installation, or if you want to keep a separate home page.

If you want your address (ie, http://www.yoursite.com) to take you directly to your genealogy, you will need to delete any existing home page or plan to merge it with TNG's home page, which is called "index.php". You will be installing TNG in the root folder, so you can then skip the rest of this step. For you, the root folder and the genealogy folder will be the same.

If you plan to set up a larger environment of which genealogy is just one section, you might want to create a subfolder on your site to hold your TNG files. You can name this folder anything you'd like, but we will refer to it from here on as the genealogy folder.
<< Prev Next >>
Files

Step 4: Uploading Files to Your Site

Using an FTP program or an online file manager, upload all the extracted TNG files from your local computer to your remote site, putting all files in their respective folders. If the folders cannot be uploaded as a group, create the folders on your site first, then upload the files within those folders to the corresponding locations. All files not in a subfolder should go in your genealogy folder. Remember, the "genealogy" folder is just whichever location you choose to hold your TNG files. It does not have to be named "genealogy".

Note: Some hosting providers might allow you to upload the zip file and extract it there on your remote site. If your online file manager will only let you upload a few files at a time, uploading the zip file would save you a lot of time.

IMPORTANT: If you are viewing this "readme" page on your home computer, finish this step and then load the readme.html page from your remote site instead (for example, "http://www.mysite.com/readme.html"). Use a browser, not an FTP program! This will make the rest of the installation much easier.
<< Prev Next >>
Permissions

Step 1: Explanation of "Permissions"

You will now be asked to set the "permissions" on some files and folders. If you have a good understanding of permissions, please feel free to skip over this explanation to the next step. Otherwise, please read this. You may be able to set your permissions with the click of a single button in the next step, but you will still benefit from this explanation.

So what are permissions? Permissions dictate who can do what with which files. In other words, you can say who has "permission" to write to or read from a certain file. TNG requires that everyone be able to write to some files and folders, so we will need to set those permissions accordingly.

Some people like to refer to these permissions as a three-digit number. Others prefer a string of "rwx" characters, and still others just speak of "read, write and execute". When you are setting permissions, you may encounter any of these three methods.

With each permission you set, you are granting rights to three different entities: the "owner" (that's you), the "group", and the "world" (includes all visitors to your site, even you). That's why permissions always come in groups of three.

If you follow the number method, each number represents a sum of read, write and execute for the different entities. Read = 4, Write = 2 and Execute = 1, so if we tell you to set a file to "664", it means that the owner and group will have Read and Write permissions (4+2), the world will have only Read permissions (4), and no one will have Execute permissions.

Using the "rwx" method, 664 would then be represented as rw-rw-r-- (the "-" character means that a permission is omitted).

Note: Mac OS X users could use the DonationWare software called BatChmod (available at VersionTracker.com or MacUpdate.com) or Fetch (available at Fetchsoftworks.com) to do the permissions settings in a user-friendly environment.

For more information, please see the TNG Wiki article Permissions Explained.
<< Prev Next >>
Permissions

Step 2: Setting Permissions

If you are viewing this page from your web site, you may be able to set all required permissions by clicking this button (go ahead and try it):

If that operation was not successful, please read the following:

Within your genealogy folder, find the files adminlog.txt, config.php, genlog.txt, importconfig.php, logconfig.php, mapconfig.php, pedconfig.php, subroot.php, templateconfig.php and whatsnew.txt and give them all Read/Write permissions (666, or rw-rw-rw-) using your file manager or FTP program. Each FTP program or file manager is different in the method used to set permissions, so please ask your hosting provider or read the documentation on your software for more detailed instructions if necessary.

NOTE: In some cases, 664 permissions (or rw-rw-r--) may be enough for each of the files mentioned above.

You may also need to change permissions on the photos, histories, documents, headstones, media, gedcom, gendex and backups folders. 755 should work in most cases, but if you have trouble uploading media, importing or backing up, try 777 instead.
<< Prev Next >>
Permissions

Step 3: Advanced Settings

If you are not your own site administrator (you're using a hosting provider), the environment will most likely be all set up for you already, and you probably won't have access to your PHP configuration anyway, so in most cases you can skip this step.

If you are the site administrator, however, please make sure that your php.ini file (part of PHP, not TNG) contains the following settings:

file_uploads = On
error_reporting = E_ALL & ~E_NOTICE

If you have PHP 5, please make sure you use extension=php_mysql.dll and copy lib-mysql.dll to where PHP can find it.

If you can find a line in php.ini referencing the value LimitRequestBody then comment it out or delete it, as this will prevent you from uploading files larger than the size indicated on that line (sometimes this value is located in the php.conf file, so look for it there if you don't find it in php.ini).

You may also wish to increase the value for upload_max_filesize if you have a large GEDCOM file. It could also be advantageous to set output_buffering to "On".

If your PHP installation is on a Windows machine, you may have to change the session.save_path variable to point to your Windows temporary folder (i.e., C:\Temp). If you make changes to your php.ini file, you must restart your PHP service before the changes take effect.
<< Prev Next >>

Languages and Character Sets

The default language is English, using the UTF-8 character set. If you don't make any changes, that is the language everyone will see when they visit your site for the first time.

To change your default language and/or character set, please select a new language from the list below. You can read more about using TNG with UTF-8 here.

If you want to support multiple languages, you can do that later from the Admin/Languages area.

Language:

Character Set:

<< Prev Next >>

Other Settings

Step 1: General Settings

There are other general settings you can change if desired. To see these settings, go to the Admin area at http://www.yoursite.com/genealogy/admin.php (if you're reading this from your web site, click here: admin.php. From there go to Setup and click on General Settings. Please see the Help link on that page for detailed information on each option

Make changes to the General Settings as needed. You shouldn't need to change any of the table names. Click the Help link at the top of the page for an explanation of each field. You can come back and make changes here at any time.

You might also look at the TNG Wiki article on General Settings, which provides links to detailed illustrated instructions on setting up the Site Design and Definition, Media, Languages, Privacy, and Cemeteries sections, as well as instructions on moving your configuration files if you use the Config Path.

NOTE on the Root Path setting: The value you see here the first time should be the correct value, so you shouldn't have to tamper with this. If you do, you can retrieve the original value by blanking out the value and saving the page. You must then return to the Settings page and save it again.

NOTE on the Config Path setting: This allows you to indicate a path above or outside the root for your writable configuration files. Entering a value here is completely optional. You should enter a path ONLY if you are able to move the files named on the screen to the proper location.

When you're finished, be sure to click the Save button to save your new settings.
<< Prev Next >>
Other Settings

Step 2: Chart, Import, Log and Map settings

To set options in other areas, go back to the Setup page, then:

Select Chart Settings to set up all pedigree chart variables. Edit the settings to reflect your web site's overall style and to accommodate your data. An extensive help file is accessible from this page to explain all options found there. You only need to do this if you don't like the current way pedigree charts are displayed, and you don't have to do it now if you're not sure what the effects will be.

Select Log Settings to set up all log-related variables. Remember to read the Help screen for information on each setting.

Select Import Settings to set up all import-related variables. Again, be sure to read the corresponding Help screen for information about anything on this page. Pay special attention to the fields labeled Local Photo/History/Document/Headstone/Other Media Path(s). If you are planning to import a GEDCOM file that contains links to photos, histories or other media, and if you want to maintain a directory structure for your media on the site (instead of putting all the media in the same folder), you'll want to fill these values before you import your file. For more information, please see the TNG Wiki article Setup - Import Settings.

Select Map Settings to set up all map related variables.

For more information, see the TNG Wiki article on Google Maps - Getting Started.

Select Template Settings to easily change the template you're using, and to change the images and text in your template home page and custom header.
For more information, see the TNG Wiki article on Template Settings.
<< Prev Next >>
Your Data

Step 1: Setting up Users

Next you must set up at least one user. A "User" can represent one or more people with the same access rights. Until you have at least one user, your Administration area will be wide open to all visitors, and all visitors to the public part of your site will be able to see all data for all individuals. You can set up your first user here or from the Admin menu. To create a user here, please fill in all of the following fields and click the Submit button. This user will have full administrator rights. You can enter more information about this user later from the Admin menu.

Username:

Password:

Password again:

Your real name:

Your Email:

To create a user from the Admin main menu, go to the Users area and click on the Add New tab.

You may add as many users as you like, but the first user you add MUST be an administrator (that's you). An administrator must have Add, Edit and Delete rights and must not be assigned to a tree. On the first user you won't even have the option to assign a tree. Since you haven't set up any trees yet, you won't be able to assign users to trees just yet anyway.

If you do not create an administrator first, or if you delete your administrator user, you may have trouble getting back here!

Only an administrator will be able to access system-wide functions like the Setup or Users. Only users with some combination of Add, Edit and Delete rights will be allowed into the Admin area. Assigning a user to a tree or branch limits that user's rights to their assigned tree or branch.

See the Help on the Admin/Users pages for more information.
<< Prev Next >>
Your Data

Step 2: Setting up Trees

Next you must create at least one tree. A "Tree" is defined as an independent data set, or a group of individuals, families and sources that is independent from any other such group. You can create your first tree here or from the Admin menu. To create a tree here, please fill in both fields below and click the Submit button. You will not be able to edit the Tree ID after you save this page. It should be a short, alpha-numeric identifier with no spaces. It will not be displayed on any public pages. You can enter more information about this tree later from the Admin menu.

Tree ID: (alphanumeric only, no spaces)

Tree Name:

To create a tree from the Admin main menu, go to the Trees area and click on the Add New tab.

Do you need multiple trees? Data from one tree cannot be linked to data in another tree, so the rule of thumb here is that if any links exist among your potential trees, the data really should be merged into one tree. Most people will only need one tree unless they are planning to maintain separate and independent GEDCOMs.

The first two fields (Tree ID and Tree Name) are required, but everything else here is optional. You will not be able to edit the Tree ID after you save this page. It should be a short identifier with no spaces. It will not be displayed on any public pages.

Do not set up branches at this time. Come back to do that after importing or entering your data.

For more information, see the TNG Wiki article Setup - Tree, which also covers how to disable the gedcom download.
<< Prev Next >>
Your Data

Step 3: Importing a GEDCOM

If you are not planning on importing any data from a GEDCOM file, you can skip this step. Otherwise, go back to the Admin main menu and click on Import/Export to prepare to import your GEDCOM file. Your file must be in standard 5.5 or 4.0 format, and you can import it directly from your local computer or from the "gedcom" folder on your remote site. Please read the Help file linked to from this page for detailed information about all import options.

If you are using multibyte characters in any part of your file (for example, characters you can't find on a standard Western keyboard), you should also be careful to use the ANSI (sometimes called "Windows") or UTF-8 character set when creating your file. Some genealogy programs will call this the "Windows" character set. For more information, see the TNG Wiki article on Character Sets.

If your GEDCOM file is large, the import may not finish. You will know the import has finished when you see a "Finished" message with the number of people, families and sources that were imported. If your import does not finish, your host may have a limit on the size of uploaded files. If you cannot resolve this with your site administrator, copy the GEDCOM file to the "gedcom" folder. Then proceed to import the file, leaving the first field on the Import screen blank (see the Help on that page for more details).

If the import begins but halts before you see the "Finished" message, your web server may be killing the import to save resources for other processes. If this happens, make sure your GEDCOM file is in the "gedcom" folder on the remote site, then return to the Import Settings and check the box labeled "Save Import State". Finally, try your import again. This time you will see a link at the top of the page that says, "If Import fails, click here to resume." Click on that link and the import will begin again at the point it stopped. You might have to click this link multiple times, depending on how large your file is or how concerned your host is about resources.

If your GEDCOM included media links, you will need to upload the actual files manually to the appropriate TNG folders (e.g., "photos") that you created earlier. Be sure to preserve any existing file structure from your Local Photo and Local History paths (See Import Settings) if that's important to you. For more information, see the TNG Wiki articles on Importing Data and Importing Media.
<< Prev Next >>
Your Data

Step 4: Custom Event Types

TNG maintains the most commonly used GEDCOM tags (ie, Birth, Death, Marriage) as "standard", meaning they are always imported every time. All others, including proprietary tags specific to certain software packages, are deemed "Custom Event Types". Events of these types are not imported or displayed until you tell TNG to "Accept" them.

The easiest way to set up all your needed Custom Event Types is to import your GEDCOM file using the "Only import Custom Event Types" option before importing the rest of your data. After that, go to the Custom Event Types area on the Admin main menu. All Custom Event Types used in your GEDCOM will be displayed there, but all will be set to "Ignore". Edit each ones you want to import and switch the flag from "Ignore" to "Accept". Also change the "Display" field to something more readable (for example, change "OCCU" to "Occupation". You may enter a different Display message for each language you are supporting. Do not change the "Type/Description" field.

Once you've made your desired changes, import your GEDCOM file again (this time without checking the "Only import Custom Event Types" box) to see the custom events imported and displayed, along with your other data.

You can also elect to import and "Accept" all Custom Event Types automatically.
If you're not importing a GEDCOM file, or if you'd rather set up Custom Event Types by hand, you may do so by going to Admin/Custom Event Types. See the Help file on that page for more information.
<< Prev Next >>
Your Data

Step 5: Manual Data Entry

If you are planning to enter your data manually, choose People, Families, Sources or Repositories from the Admin main menu to get started. Everything should be fairly self-explanatory, but all pages have associated help files you can use if you need them. There are no rules as to whether you should enter people or families first. It's up to your personal style and preference.
<< Prev Next >>
Your Data

Step 6: Secondary Processes

After importing or entering your data, go back to the Import/Export area and click on the Secondary Processes tab to perform various additional functions. See the Help file on this screen for detailed information on each process. For example, click "Track Lines" to trace the lines of descent within your genealogy. This places a small mark next to children in a family group who have offspring of their own, allowing users to more easily follow your lines of descent.

If your desktop software did not sort children or spouses according to birth or marriage date, you can use the "Sort Children" or "Sort Spouses" utilities to do that now.

From this area you can also create a GENDEX file to enable your site to be indexed on the TNG Network.

Another option here is "Relabel Branches". (You can create "Branches" in a tree in order to confine user rights to only a part of that tree. To create branches in a tree, go back to Trees, then click the Branches icon for that tree.) If you re-import your data with the "Replace All Data" option after setting up your branches, your branches will be removed during the import. Use the "Relabel Branches" feature to put them back.
<< Prev Next >>
Your Data

Step 7: Media (Photos, Histories, Documents, Headstones, etc.)

Media links may be imported as part of your GEDCOM file, or you may set them up manually using the Admin menu. If you import these items with your GEDCOM, you will still need to copy the actual files to the corresponding TNG folders (e.g., "photos", "histories" or "documents").

"Cemeteries" are not supported as separate entities by the GEDCOM standard, so these will not be imported in a GEDCOM file as such. You will need to use the Admin menu to set them up. If you had links to photos of headstones in your GEDCOM, they will be imported as "photos". You can then use TNG to convert them to "headstones". See the Help under Admin/Media for more information.

All media must have a unique physical path and file name. Because of that, you will see an error message if you try to add a second record for the same file name.

Media may be linked to individuals, families, sources, repositories, events and places. All media links may be imported from a GEDCOM file, with the exception of media linked to places.

Links to media are held in separate tables, so re-importing your GEDCOM will not break these links unless the ID numbers in your GEDCOM have changed since your last import. You should verify they are the same before re-importing. NOTE: if you imported these items with your GEDCOM and have changed your Root Path since then, importing these items again will create duplicates. To avoid this, click the option on the Import screen to ignore media present in the GEDCOM.

For more information, please see the TNG Wiki article Media - Import.
<< Prev Next >>
Your Data

Step 8: Utilities: Backup/Optimize/Restore

It is recommended that you back up your table data regularly using the Backup utility. This will create a series of .bak files in the "backups" folder. If possible, it is also recommended that you set permissions on the "backups" folder to 771 (rwxrwx-x) for maximum security (must be done *after* backups have been created). To avoid data loss in the event of a server crash, copy or move these .bak files down to your local computer.

If your data becomes corrupted or lost, you can use the Restore utility to bring it back.

The Optimize utility can be used to speed up your data access by removing slots for deleted records.

For more information, please see the TNG Wiki articles Data Protection.
<< Prev Next >>
Customizing Your TNG Pages

Step 1: Templates

An easy way to quickly give your site a professional look and feel is to install one of TNG's pre-built templates. The templates files are in the "templates" folder. To select a template, go to Admin/Setup/Template Settings and choose the number of the one you want. Also make sure that "Enable Template Selection" is set to Yes, then click "Save" at the bottom. You can change templates as many times as you'd like. If you do not want to use a template and would rather customize the default home page, header and footer, then set "Enable Template Selection" to No.

You can easily change most of the images and text used in the template home page (index.php) and custom header (topmenu.php) using the new Admin/Setup/Template Settings capability. You may also make changes directly to the template files. See the Template Settings article on the TNG Wiki for more information.

More information on templates can be found on this page on the TNG Wiki.
<< Prev Next >>
Customizing Your TNG Pages

Step 2: Style Sheets

Even if you use one of the pre-built templates, you may want to make changes to fonts, colors, text sizes and other style elements. All of these aspects are controlled by "style sheets". Style sheet files end with the .css extension. The core style sheet used by TNG is called genstyle.css (general rules) and can be found in the "css" folder. The "css" folder also contains default versions of the template style sheet (templatestyle.css), mytngstyle.css (for you to make your own style changes) and a few others, including tngtabs1.css/tngtabs2.css (two different tab styles).

Each template also includes its own copy of templatestyle.css, mytngstyle.css and the tab style sheets that override the default style rules.

If you want to change the existing style rules from any of CSS file or add your own style rules, you should make those changes in the file called mytngstyle.css, as that file will not be overwritten in future updates. IMPORTANT: Make your changes in the copy of mytngstyle.css within the folder for the template you're using. For example, if you're using Template #3, make your custom style changes in templates/template3/css/mytngstyle.css. If you are planning on switching among multiple templates, you might need to make changes in the other copies of mytngstyle.css as well. If you will not be using a template, make your changes in the main css/mytngstyle.css file.

To make changes to mytngstyle.css, simply open it in a text editor, make your changes, then save the file back to your web site. If you want to redefine a style block from genstyle.css, just copy it from that file into mytngstyle.css and add your own changes. Anything you redefine in that file will take precendence, so only copy the lines you want to change. Some comments are included in genstyle.css to help you know which lines control what elements. If you're not sure what you can do in a style sheet, we recommend you try http://www.htmlhelp.com/reference/css, or simply search the Internet for "style sheets help").

Tabs: Some TNG pages have a series of tabs across the top. You can choose from two different tab styles (see the General Setting page for more information). If you choose the square style, you can change the colors of these tabs in the "tngtabs2.css" file. You will want to make your "active" tab match the "fieldnameback" definition from genstyle.css, and you will want to make your "inactive" tab match the "databack" definition from genstyle.css.

If you choose the slanted tab style, you can change the attributes in "tngtabs1.css", but the colors are made from image files. To create new tab images in a different color, make sure your "photos" folder has been made writeable, then go to the page switchcolor.php in your browser (http://www.yoursite.com/genealogy/switchcolor.php). If you're reading this page from your web site, click here: switchcolor.php. You will see a utility that will help you create new tab images. Again, you will want to make your "active" tab match the "fieldnameback" definition from genstyle.css, and you will want to make your "inactive" tab match the "databack" definition from genstyle.css.If the utility does not work for you, you may not have the GD image library installed on your web site. Try creating the tabs here instead: http://lythgoes.net/genealogy/switchcolor.php.
<< Prev Next >>
Customizing Your TNG Pages

Step 3: Header, Footer and "Meta" Files

If you have other style sheets you want to add, or if you have scripting code or meta tags you want to place on all your TNG pages, add them to the TNG files called meta.php (public pages) and adminmeta.php (admin pages).

To change the appearance of the header that appears on all TNG pages (except the home page), edit topmenu.php (the default "Custom Header" file) in a text or HTML editor and customize as needed. The contents of this file will include the opening BODY tag.If you decide to use a different file for your Custom Header, you will need to indicate that in the General Settings in the Custom Header field.

To change the appearance of the footer that appears on all TNG pages (except the home page), edit footer.php (the default "Custom Footer" file) in a text or HTML editor and customize it in the same manner. The contents of this file will appear on each page just before the closing BODY tag. If you decide to use a different file for your Custom Footer, you will need to indicate that in the General Settings in the Custom Footer field.

Things to note about these pages:
1. They are actually only page fragments, meaning that they are pieces of HTML and not complete HTML pages. If you open them in a "smart" editor like FrontPage, it may try to "fix" these fragments by adding back the "missing" pieces. It is therefore recommended that you first open them in a text editor or save a backup copy just so you can compare before and after and delete any elements that are added back. For instance, the topmenu.php file contains a <BODY> tag but no ending </BODY> tag. If the </BODY> tag is added back, your pages may not display properly.
2. You may rename these files if you want. If you do, be sure to put the new names in the appropriate fields on the General Settings page. Maintaining ".php" as the file extension is essential if you plan to include any PHP code.
<< Prev Next >>
Customizing Your TNG Pages

Step 4: Home Page

Your home page for TNG is called index.php. If you had a prior home page called "index.htm" or "index.html", you may have to remove it in order for your new home page to be displayed when your domain name alone is entered into a browser.

To customize your home page, open index.php in your text or HTML editor and make changes as needed. You may rename it, but if you do you will also need to indicate the new name in the General Settings. If you are planning to use TNG as a Nuke module, you will want to use and customize the version of this file that comes with the TNG Nuke Add-on instead.

For more information, please see the TNG Wiki articles on Home Pages - Getting Started and User Pages - Getting Started.
<< Prev Next >>
Final Notes

Searching:
When doing a simple search from the default "home page" (index.php), TNG looks to see if the search terms are "contained" in the corresponding fields of the target records. In other words, a search for "Ed" will find "Edward", "Fred" and "Cedrick". This is intentional so that as many results as possible will be returned. If you wish to limit responses to those that start with the search term(s), simply edit the index.html file and include the following hidden fields in the form: lnqualify (for surnames; value="starts with") and fnqualify (for given names; same value). This will coerce the search to find results where the beginning of the data starts with the search term(s). This also has the additional benefit of significantly improving performance during the simple search. If you have a large database, this might be something to consider.

RSS:
To use the RSS newsfeed feature, open your favorite RSS reader and subscribe with this URL: http://yourdomain.com/yourgenealogyfolder/tngrss.php. You can make the feed appear in a different language by appending "&lang=yourlanguage", where "yourlanguage" is the name of the language in TNG.

Timelines:
Depending on your margins or sidebar width, you may find that the bars on the timeline do not line up correctly with the year markers. If this is the case, please edit the file timeline2.php and adjust the values $lineoffset, $chartwidth, $checkboxcellwidth and $division as needed.

Files to Delete:
When you're done with the installation, there are some files you might want to remove from your site in order to provide greater security. Those files are: readme.html (this file), ajx_tnginstall.php and appendix.html.

More Information:
You might also want to read the Getting Started articles on the TNG Wiki.

Go to your home page

Go to the Admin menu
<< Prev Next >>
Appendix

Appendix (list of files)
<< Prev

TNG Installation Instructions

Welcome to the TNG installation guide!

Start

Express Installation

Regular Installation

Files

Files

Files

Files

Permissions

Permissions

Permissions

Folders

Languages and Character Sets

Database Tables

Database Tables

Other Settings

Other Settings

Your Data

Your Data

Your Data

Your Data

Your Data

Your Data

Your Data

Your Data

Customizing Your TNG Pages

Customizing Your TNG Pages

Customizing Your TNG Pages

Customizing Your TNG Pages

Final Notes

Appendix